(12 Ratings)

API 570 Piping Fundamentals

Categories: Chemical, Mechanical, Petroleum

Wishlist

About Course

Course Content

Corrosion Under Insulation
Corrosion Under Insulation (CUI) is a form of external corrosion that occurs beneath insulation systems on piping or equipment. It is considered one of the most dangerous corrosion mechanisms because it is hidden from view and often progresses unnoticed until failure occurs.CUI develops when moisture (rainwater, condensation, wash water, or process leaks) penetrates damaged or poorly sealed insulation and becomes trapped against the metal surface.

Corrosion Under Insulation
09:27

Deadlegs
A deadleg is a section of piping that has little or no flow during normal operation. Because fluids remain stagnant, deadlegs are highly susceptible to accelerated corrosion, making them a critical concern in piping integrity management.

Injection Points
An injection point is a location in a piping system where chemicals, inhibitors, water, steam, or other substances are introduced into the process stream. These areas are considered high-risk locations due to potential localized corrosion, erosion, or cracking caused by improper mixing or aggressive injected fluids.

Inspecting for Deterioration
Inspecting for Deterioration refers to the systematic inspection of piping systems to identify damage, degradation, or loss of integrity that may affect safe operation. API 570 emphasizes early detection of deterioration to prevent leaks, failures, and safety incidents.

Inspection Procedure
An inspection procedure is a structured process used to evaluate the condition, integrity, and fitness-for-service of piping systems in order to ensure safe and reliable operation.

Piping Component
Piping components are individual items that make up a piping system and are essential for controlling flow, pressure, and direction of process fluids. In API 570, piping components require inspection to ensure they remain safe, reliable, and fit for continued service.

Soil to Air Interface
The Soil-to-Air Interface (SAI) is the transition zone where a buried pipe emerges from the soil and becomes exposed to the atmosphere. This area is considered highly susceptible to accelerated corrosion due to changing environmental conditions.

Quiz

Add this certificate to your resume to demonstrate your skills & increase your chances of getting noticed.

Student Ratings & Reviews

4.2

Total 12 Ratings

8 Ratings

0 Rating

3 Ratings

0 Rating

1 Rating

AIMAN ASYRAF BIN MOHD NUHAIRI

2 weeks ago

The explaination is very bad by the inspector, theres no slide given in pdf to refer, the quiz question 4,5,6 maybe got error. Please improve.

Anandaraj Bhupalan

3 months ago

good

AWANGKU MUHAMMAD AZIZI AL HAKIM BIN AWANGKU SAFASUMARIZAM

4 months ago

So nicee

Kairul Hakimi

4 months ago

Excellent..good video and knowledge

Adha Hannan

4 months ago

Cara pencerahan tentang API 570 sedikit susah untuk faham kerana cara pencerahan yang kurang jelas

Maurie Paramus anak Lau

4 months ago

Everything was in excellent condition.

UNGKU MOHD SHARIDZAT B. UNGKU ABDUL MALIK

5 months ago

Good

Admin Oil and Gas Meta

5 months ago

Jimmy Tan

6 months ago

The trainer is not organize

Allia Malek Ridwan

7 months ago

great

Fazrul Azreen

7 months ago

This learning program really benefit me. Thank you

MOHD HASHIM BIN ZAINAL BIDIN

7 months ago

...

API 570 Piping Fundamentals

About Course

Course Content

Corrosion Under Insulation

Deadlegs
A deadleg is a section of piping that has little or no flow during normal operation. Because fluids remain stagnant, deadlegs are highly susceptible to accelerated corrosion, making them a critical concern in piping integrity management.

Deadlegs

Injection Points

Inspecting for Deterioration
Inspecting for Deterioration refers to the systematic inspection of piping systems to identify damage, degradation, or loss of integrity that may affect safe operation. API 570 emphasizes early detection of deterioration to prevent leaks, failures, and safety incidents.

Inspecting for Deterioration

Inspection Procedure
An inspection procedure is a structured process used to evaluate the condition, integrity, and fitness-for-service of piping systems in order to ensure safe and reliable operation.

Inspection Procedure

Piping Component
Piping components are individual items that make up a piping system and are essential for controlling flow, pressure, and direction of process fluids. In API 570, piping components require inspection to ensure they remain safe, reliable, and fit for continued service.

Piping Component

Soil to Air Interface
The Soil-to-Air Interface (SAI) is the transition zone where a buried pipe emerges from the soil and becomes exposed to the atmosphere. This area is considered highly susceptible to accelerated corrosion due to changing environmental conditions.

Soil to Air Interface

Quiz

Quiz

Earn a certificate

META

Dapatkan E-book Senarai 100 Syarikat Oil & Gas Offshore Malaysia PERCUMA

About Course

Course Content

Corrosion Under Insulation

Deadlegs A deadleg is a section of piping that has little or no flow during normal operation. Because fluids remain stagnant, deadlegs are highly susceptible to accelerated corrosion, making them a critical concern in piping integrity management.

Deadlegs

Injection Points

Inspecting for Deterioration Inspecting for Deterioration refers to the systematic inspection of piping systems to identify damage, degradation, or loss of integrity that may affect safe operation. API 570 emphasizes early detection of deterioration to prevent leaks, failures, and safety incidents.

Inspecting for Deterioration

Inspection Procedure An inspection procedure is a structured process used to evaluate the condition, integrity, and fitness-for-service of piping systems in order to ensure safe and reliable operation.

Inspection Procedure

Piping Component Piping components are individual items that make up a piping system and are essential for controlling flow, pressure, and direction of process fluids. In API 570, piping components require inspection to ensure they remain safe, reliable, and fit for continued service.

Piping Component

Soil to Air Interface The Soil-to-Air Interface (SAI) is the transition zone where a buried pipe emerges from the soil and becomes exposed to the atmosphere. This area is considered highly susceptible to accelerated corrosion due to changing environmental conditions.

Soil to Air Interface

Quiz

Quiz

Earn a certificate

Student Ratings & Reviews

Dapatkan E-book Senarai 100 Syarikat Oil & Gas Offshore Malaysia PERCUMA

Deadlegs
A deadleg is a section of piping that has little or no flow during normal operation. Because fluids remain stagnant, deadlegs are highly susceptible to accelerated corrosion, making them a critical concern in piping integrity management.

Inspecting for Deterioration
Inspecting for Deterioration refers to the systematic inspection of piping systems to identify damage, degradation, or loss of integrity that may affect safe operation. API 570 emphasizes early detection of deterioration to prevent leaks, failures, and safety incidents.

Inspection Procedure
An inspection procedure is a structured process used to evaluate the condition, integrity, and fitness-for-service of piping systems in order to ensure safe and reliable operation.

Piping Component
Piping components are individual items that make up a piping system and are essential for controlling flow, pressure, and direction of process fluids. In API 570, piping components require inspection to ensure they remain safe, reliable, and fit for continued service.

Soil to Air Interface
The Soil-to-Air Interface (SAI) is the transition zone where a buried pipe emerges from the soil and becomes exposed to the atmosphere. This area is considered highly susceptible to accelerated corrosion due to changing environmental conditions.